Partner Series
Partner Basic, Partner Plus, Partner II, Partner ACS

How do I change the date?

You must be at extension 10 or 11 to make programming changes.
  1. Press feature 0 0

  2. Press Left Intercom key twice

  3. Press # 1 0 1

  4. Enter current date in the form mmddyy (month, day, year),including leading zeros for single digit months or days. For example, to enter June 18, 2001, press 061801. A display similar to the following appears:
    System Date
    Data 061801

  5. Press feature 0 0 to exit programming.
How do I change the time?

You must be at extension 10 or 11 to make programming changes.
  1. Press feature 0 0

  2. Press Left Intercom key twice

  3. Press # 1 0 3

  4. Enter current time in 24 hour notation. For example, to set the time to 2:15 p.m., press 1415. A display similar to the following appears:
    System Time
    Data 1415

  5. Press feature 0 0 to exit programming
Is my Partner system capable of name and number display?

Yes. Partner Basic, Partner Plus and Partner II are capable of name and number display with a Caller ID Card.

The Partner ACS is installed ready for name and number display.

Although the Partner system is capable of this feature, the telephone line provided by the local telephone company also needs to activate this feature.

How are speed dial numbers (auto dial numbers) programmed?
  1. From extension 10 or 11, press Feature 0 0.


    2.
  2. Press the Left Intercom key twice.


    3.
  3. Press the Right Intercom key once.


    4.
  4. Enter the extension number to be programmed.


    5.
  5. Press an available programmable button.


    6.
  6. Enter an outside telephone number exactly as it would normally be dialed, or enter a feature code, account code or press the left intercom key and enter an extension number.


    7.
  7. Repeat steps 5 & 6 to program additional Auto Dial buttons or press feature 0 0 to exit programming.
Return to Top
Back to FAQ's main page